21
Removing and Attaching the Foot Holder
Remove the foot holder before using the dual feed foot or
darning foot.
CAUTION:
Always make sure to press the lockout key to lockout
the machine before replacing the foot holder.
Removing the foot holder
Raise the needle by pressing the needle up/down button.
Press the lockout key and raise the presser foot with the
presser foot lifter.
q Needle up/down button
w Lockout key
e Presser foot lifter
t
t
r
y
r
e
q
Loosen the setscrew and remove the foot holder.
r Setscrew
t Foot holder
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
Tighten the thumbscrew securely with the screwdriver.
y Presser bar
w
To Next Page
Loading...
