Janome Skyline S9 - S1-S20 Decorative Satin Stitches; Elongation Ratio

62
X1 X2 X3 X4 X5
q
r
w
e
S1-S20 Decorative Satin Stitches
Elongation Ratio
Patterns S1 to S20 are decorative satin stitches for which
the pattern length can be elongated without changing
the stitch density.
Press the setting bar q to expand the manual setting
window.
q
Setting bar
Press the “+” key to elongate the stitch pattern.
w
“+” key (elongation)
To reduce the elongation ratio, press the “–” key.
e
“–” key (elongation)
The pattern can be elongated up to 5 times the original
length.
The elongation ratio is indicated in the box.
r
Elongation ratio
You can also alter stitch density and stitch width.
NOTE:
The elongation function and the tapering function (refer
to page 63) cannot be applied at the same time.
The elongation function will be removed when a
tapering function is applied to the elongated stitch.