127
Color list key
Press the down arrow key q or up arrow key w to show
the next set of function keys.
Press the color list key e to view a list of thread colors
employed in the selected design.
r t
Press the stitch number key r to view a number of
stitches for each color in the selected design.
Press the spool key t to view a list of thread colors
employed in the selected design.
y
i Cutting the tails of jump threads
This option can be used when the “jump thread cutting
length” setting or “cutting command“ is activated (refer to
page 154).
Press the “+” or “–” key to adjust the tail length of jump
thread.
o Embroidery foot height
Press one of the fabric icon keys ( !0 or !1 )to select the
recommended height or press the “+” or “–” key to ne
tune the foot height.
!0 Plain fabric key
!1 Quilting key
To return the manual settings to their default settings,
press the default key !2.
Press the OK key to apply the settings.
Press the X key to cancel the settings.
Adjust key
Press the adjust key to open the manual setting window.
You can adjust the following settings in this window.
y Adjust key
u Auto thread tension level
Press the “+” or “–” key to adjust the thread tension to
your preference.
w
e
q
u
i
o
!1!0
!2
To Next Page
Loading...
