151
!4
!3
To sew:
NOTE:
The knots may appear at some points of a ball of yarn.
Be careful not to feed the knot of yarn into the mouth
of the yarn guide while sewing.
Set the fabric to the hoop.
Attach the hoop to the carriage.
Press the start/stop button and sew 5 to 6 stitches.
Press the start/stop button again to stop the machine.
Cut the loose yarn !3 and thread !4 to the beginning of
the starting point.
Press the start/stop button to start sewing again.
!3 Loose yarn
!4 Loose thread
The machine will stop (and trim the threads if the auto
thread cutting is activated) automatically when the rst
color section is nished.
Change the thread to the next color and yarn.
Sew the next section.
NOTE:
Remove the couching foot when nished couching
design. The needle may strike the couching foot when
switching the ordinary sewing mode.
NOTE:
When you combine couching designs, it is necessary
to stop the machine and trim the excess yarn after the
yarn jumps to the next couching design.
To Next Page
Loading...
