Janome Skyline S9 - Attaching the Darning Foot PD-H; Attaching the Embroidery Foot P; Attaching the Couching Foot PC-1 or PC-2

23
Attaching the Darning Foot PD-H
Attach the darning foot PD-H to the presser bar by
putting the pin on the needle clamp screw.
q Pin
w Needle clamp screw
Tighten the thumbscrew rmly with the screwdriver.
Attaching the Couching Foot PC-1 or PC-2
Attach the couching foot PC-1 or PC-2 to the presser bar
from front (refer to page 149).
Tighten the thumbscrew rmly with the screwdriver.
Attaching the Embroidery Foot P
Attach the embroidery foot P to the presser bar from
behind (refer to page 109).
Tighten the thumbscrew rmly with the screwdriver.
w
q