Janome Skyline S9 - Hoop Back Key

128
Hoop back key
Press the needle up/down button to raise the needle at
its highest position if the needle is in down position.
Press the hoop back keyq. The embroidery foot will be
raised automatically, and the hoop back option window
will open.
Press the key w and the conrmation window open.
Press the OK to move the carriage back to the home
position and return to the Ready to Sew screen. Press
one of the keys to move the carriage to a
standby position.
Press the X key to close the hoop back option window.
w Hoop back key
w
Press the hoop back key e or the start/stop button.
The caution message appears.
Press the OK key and the hoop will go back to the
original position.
q
e