109
Attaching the Embroidery Foot
Use the embroidery foot P for embroidery.
z Turn the power switch on.
Turn the handwheel toward you to raise the needle its
highest position.
Press the lockout key and raise the presser foot with
the presser foot lifter.
q Lockout key
w Presser foot lifter
t
e
r
x Loosen the thumbscrew with the screwdriver and
remove the foot holder.
e Thumbscrew
r Foot holder
c Attach the embroidery foot P to the presser bar from
behind. Tighten the thumbscrew partially by hand.
t Embroidery foot P
v Lower the foot with the presser foot lifter.
Tighten the thumbscrew securely with the screwdriver.
z
x
c
v
w
q
To Next Page
Loading...
