100
y
u
i
y Foot height for pivoting
When the foot up option is turned on, the presser foot will
automatically go up when the machine stops.
The height of the foot in the up position can be adjusted
by pressing the “+” key or “–” key in accordance with
thickness of the fabrics.
u Foot pressure
The foot pressure is automatically optimized but you can
adjust the foot pressure manually by pressing the “+” key
or “–” key.
i Variable zigzag sensitivity
You can adjust the amount of needle swing against
the knee lifter movement for variable zigzag in sewing
applications.
Press the “–” key so the needle swings a small amount
when moving the knee lifter.
Press the “+” key so the needle swings a large amount
when moving the knee lifter.
Press the next page key to show the next menu.
To Next Page
Loading...
