49
To sew another buttonhole in a different size press the
X key on the dialog box.
NOTE:
To cut the buttonhole opening, refer to the instructions
on page 45.
The memorized length will be cancelled if the presser
foot is raised or the startover key is pressed before
buttonhole is completed.
q
c Start sewing again, and the machine sews the front
bartack and right side of the buttonhole.
Stop the machine when you reach the ending point.
Then press the reverse button q.
v Start sewing again, and machine sews the back
bartack and locking stitches then stops automatically
with the needle in the up position.
When the buttonhole is nished, a message will
appear.
To make the next buttonhole, position the fabric and
start sewing again. The message disappears and the
machine sews another buttonhole identical to the rst
one then stops automatically.
c
v
To Next Page
Loading...
