96
i
o
!0
i Standby Timer
The sewing lights will turn off and the machine will enter
standby mode if you do not use the machine within the
time period set by this timer. Doing any operation will turn
the lights and screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the “+” key
until “OFF” shows in the timer window.
o Screen Saver
Press the ON/OFF key to turn on the screen saver, and
the visual touch screen will show the screen saver when
the machine is in standby status.
Press the import key to import a screen saver from a
USB ash drive.
You can create an original screen saver with Screen
Saver Tool included in the Acutools S CD-ROM.
The imported screen saver data will be deleted if the
delete key is pressed, or the internal memory is
formatted (refer to page 95).
!0 Import key
Press the next page key to show the next menu.
u Upper Thread Sensor
If you need to run the machine without threads, turn off
the upper thread sensor.
Press the next page key to show the next menu.
y
u
y Sewing Light
The sewing lights can be turned on or off individually.
Press the corresponding light keys to turn on or off the
sewing lights.
To Next Page
Loading...
