Janson Controls FC100 Series User Manual

69
Frequency
7: Accelerating
When inverter is in the status of accelerating, this contact is ON.
8: Decelerating
When inverter is in the status of decelerating, this contact is ON.
9. Under voltage alarming
When inverter detects that DC bus voltage is lower than setting value, this
contact is ON and alarm. Under voltage alarming setting value can be changed
through advanced application parameter group.
6
Chapter 6 Description of parameter setting
FC100 Series User Manaul

Janson Controls FC100 Series Specifications

General

Brand	Janson Controls
Model	FC100 Series
Category	Controller
Language	English