JBL VTX A12 Rigging Manual

VT X A12 | Rigging Manual
11
4 - SYSTEM COMPONENTS
VTX A12 AF | Array Frame VTX A12 SB | Suspension Bar
(Preliminary)
VTX A12 AF EB | Extension Bar
VTX A12 VT | Vertical Transporter VTX A12 VT CVR | Cover VTX A12 VT GND | Ground Stack
(Preliminary)
VTX Delta | Delta Plate
(Preliminary)
CAUTION: Always use components and accessories specified and approved by JBL Professional. When a
cart is used, use caution when moving the cart to avoid injury from tip-over

JBL VTX A12 Specifications

General

Nominal Impedance	8 ohms
Horizontal Coverage	90 degrees
Input Connectors	Neutrik NL4
Type	3-way
LF Driver	12"
MF Driver	4 x 5"
HF Driver	3 x 2"
Enclosure Construction	Plywood
Coverage Pattern	90° horizontal
Drivers	LF: 3 x 12", MF: 4 x 5", HF: 3 x 2"
Enclosure Material	Plywood