VT X A12 | Rigging Manual
33
9.9 - EXTENSION BAR USE CASES
The VTX A12 Array Frame can be deployed in a number of configurations with one or two VTX A12 Extension Bars. It is important
to note that only certain configurations are correct and safe for suspension of VTX A12 arrays. The images below illustrate proper
configurations for attaching VTX A12 Extension Bars, and where suspension points should be attached to the Extension Bars. Sus-
pension points should never be connected horizontally across two extension bars.
SINGLE POINT DUAL POINTS
SIDE-BY-SIDE
DUAL POINTS
FRONT-TO-BACK
DUAL POINTS USING BRIDALS
FRONT-TO-BACK
FOUR POINTS
CAUTION: When multiple suspension points are used, always make sure all suspension points are evenly
or properly loaded.
To Next Page
Loading...
