To Next Page

To Previous Page

VT X A12 | Rigging Manual

7 - A12 RIGGING SYSTEM OVERVIEW

VTX A12 cabinets include a next generation rigging system that is easy to use, simple to understand and highly accurate. VTX A12

enclosures are transported vertically on carts of four using the VTX A12 VT - Vertical Transporter cart system accessory. During

transportation, all four cabinets travel collapsed and set to the 10-degree position. Cabinet-to-cabinet splay angle selection is done

while the system is still on the ground, simply by moving the angle selection QRP (quick release pin) to the desired position. When

speakers are lifted oﬀ the VTX A12 VT carts, an automatic angle-lock mechanism engages to secure the cabinets to the selected

position. The cabinets maintain their splay positions until the user releases the angle-lock mechanism, at which point the cabinets

can collapse again and be stored on the cart.

7.1 - A12 RIGGING CLOSEUP

FRONT CONNECTION POINT

REAR CONNECTION POINT

FRONT QRP

ANGLE SELECTION

REAR QRP

LOCK RELEASE BUTTON

ANGLE-LOCK MECHANISM

Other manuals for JBL VTX A12

Questions and Answers:

Need help?

Do you have a question about the JBL VTX A12 and is the answer not in the manual?

General