123
122
55
Press the key to finish the setting.
• The video signal system output from the video-out terminal is switched to
the selected one.
33
Press the or key so that [VIDEO OUT] is highlighted
and press the key.
SWITCHING THE VIDEO SIGNAL FROM THE VIDEO OUTPUT TERMINAL- CONT'D
PAL
NTSC
44
Select [PAL] or [NTSC] with the or key.
• The setting of the beep changes in the following order.
11
Rotate the function dial to and slide the power switch
to turn on the camera.
• The power switch returns to the initial position.
22
Rotate the function dial to "SETUP".
• The setup mode menu is displayed on the LCD monitor.
SWITCHING THE VIDEO SIGNAL FROM THE VIDEO OUTPUT TERMINAL
As this camera has the video-out terminal, you can watch the captured images on TV by connecting
this camera to your TV with the supplied video cable.
The video output signal can be switched between NTSC and PAL.
What is an NTSC system and a PAL system?
Both are the color television broadcast system. The NTSC system is mainly used in U.S.A., Japan, Canada,
Mexico, the Philippines, Korea, etc. The PAL system is used in the western Europe such as Germany, England,
Switzerland, Holland, Italy (except for France) and Australia, Singapore, Thailand, China, etc.
As these systems have no compatibility, you cannot watch the NTSC system based TV in the area where a PAL
system is used.
This camera can switch the video output signal to both an NTSC system and a PAL system. So you can watch the
images on TV not only in your country, but in other areas.
To Next Page
Loading...
Need help?
General