6766
33
Press the or key so that the desired image size mode
is highlighted press the key.
• The image size mode changes in the following order.
SPECIFYING THE IMAGE SIZE MODE - CONT'D
FULL (2272X1704)
HALF (1600X1200)
5 Press the MENU button.
• The selected image size mode is specified and displayed under the image
quality on the upper left side of the LCD monitor (see page 34).
* The setting of the image size mode is stored in the camera’s memory even after the camera is
turned off.
* Changing the image size mode affects the remaining number of images which can be recorded in
the card. We recommend you to check the number display of recordable remaining frame on the
data panel when you change the image size mode.
VGA (640X480)
2 Press the or key so that [IMAGE SIZE] is highlighted and
press the key.
SPECIFYING THE IMAGE SIZE MODE
Before taking pictures, select the image size. Changing the image size affects the number of the
image which can be recorded in the CF card. The " FULL " or " HALF " or VGA size can be selected.
1 Rotate the function dial to and press the MENU button.
• The recording mode menu is display on the LCD monitor.
Image Size
FULL
HALF
VGA
Number of Pixels (W x H)
2722X1704
1600X1200
640X480
To Next Page
Loading...
Need help?
General