113112
11
Rotate the function dial to and slide the power switch
to turn on the camera.
• The power switch returns to the initial position.
22
Rotate the function dial to "SETUP".
• The setup mode menu is displayed on the LCD monitor as shown in the fig-
ure.
33
Press the or key so that [POWER SAVE] is highlight-
ed and press the key.
SPECIFYING THE TIME FOR THE AUTO POWER OFF FUNCTION
To save the battery power, this camera will be turned off automatically if it is not operated more than 3
minutes. (Auto Power Off function) The time for the auto power off function is set to 3 minutes unless
you change the setting after you purchase this camera.
Continued on Next page
THE SETUP MODE MENU DISPLAY - CONT'D
NO
YES
DATE/TIME
(For setting or correcting
the date and time, see
page 117)
DATE
TIME
YYYY/MM/DD
HH:MM
BEEP
(For turning on or off the beep, see page 120)
ON (The beep sounds.)
OFF (The beep does not sound.)
VIDEO OUT
(For switching the video signal from the video-out terminal, see page 122)
PAL
NTSC
LANGUAGE
(For switching the language displayed on the LCD monitor, see page 124)
ENGLISH
DEFAULT
(For resetting the camera, see page 126)
To Next Page
Loading...
Need help?
General