JD 4100Z3 - Specifying the Sharpness Mode

71
70
44
Press the key.
SPECIFYING THE SHARPNESS MODE - CONT'D
33
Press the or key so that the desired [sharpness] is
highlighted.
• The sharpness mode changes in the following order.
HARD
NORMAL
SOFT
55
Press the MENU button.
• The selected sharpness mode is specified and displayed on the lower left
side of the LCD monitor (see page 34). However, when "NORMAL" is
selected, no display appears on the LCD monitor.
2 Press the or key so that [SHARPNESS] is highlighted
and press the key.
1 Rotate the function dial to and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.
SPECIFYING THE SHARPNESS MODE
This camera has three sharpness modes as described below.
HARD
NORMAL
SOFT
This enhances the sharpness of image.
No effect of sharpness.
This reduces the sharpness of image and makes an image soft.