To Next Page

To Previous Page

115114

FORMATTING THE CF CARD

This allows you format the CF card.

CAUTION

As all the images recorded in the CF card are deleted and cannot be recovered, be careful when

for formatting the CF card.

Rotate the function dial to and slide the power switch

to turn on the camera.

• The power switch returns to the initial position.

Rotate the function dial to "SETUP".

• The setup mode menu is displayed on the LCD monitor as shown in the fig-

ure.

Continued on Next page

SPECIFYING THE TIME FOR THE AUTO POWER OFF FUNCTION- CONT'D

Press the or key so that the desired time for the

auto power off function is highlighted.

• The time for the auto power off function changes in the following order.

Press the key to finish the

setting.

´Only when suing the batteries, the time for the auto power off function can be specified. When using

the AC adapter (sold separately), the time for the auto power off function is fixed in 30 minutes and

cannot be changed.

´When this camera is connected to the computer , the time for the auto power off function is fixed 30

minutes automatically regardless of the setting or the power supply.

30 MIN. (30 minutes)

10 MIN. (10 minutes)

5 MIN. (5 minutes)

3 MIN. (3 minutes)

1 MIN. (1minute)

JD 4100Z3 User Manual

Questions and Answers: