6564
SPECIFYING THE IMAGE QUALITY MODE - CONT'D
55
Press the MENU button.
• The selected image quality mode is specified and displayed on the upper
left side of the LCD monitor (see page 35).
* It does not matter if there are images recorded in different image quality modes in a CF card.
* The setting of the image quality mode is stored in the camera’s memory even after the camera is
turned off.
* Changing the image quality mode affects the remaining number of images which can be recorded in
the card. Selecting " ", in particular, may considerably reduce the remaining number of imaged
We recommend you to check the number display of recordable remaining flame on the data panel.
3 Press the or key so that the desired image quality mode
is highlighted and press key to finish the setting.
• The image quality mode changes in the following order.
22
Press the or key so that [QUALITY] is highlighted and
press the key.
SPECIFYING THE IMAGE QUALITY MODE CONT'D
11
Rotate the function dial to and press the MENU button.
• The recording mode menu is displayed on the LCD monitor.
(Fine mode)
(Standard mode)
(Economy mode)
To Next Page
Loading...
Need help?
General