radio control system
EN
1. Signal strength in the 2.4GHz band.
5. The name of the active flight mode.
2.-3. Display of the status of two RF transmitter modules for the 2.4
GHz band. The tick icon indicates that the exact module is
active and communicating with the receiver. The cross icon
indicates that the transmitter module has not established
communication with the receiver or the receiver is not
available.
4. Display of active/inactive RF module for the 900 MHz band.
6. Tecording of telemetry data in the transmitter's memory. If a
square is displayed, recording is disabled. If a flashing circle is
displayed, telemetr y data is being recorded in the
3.5 Top bar icons
Note: the „F4" „Start/Stop” button starts or stops telemetry data
recording. The „F5" „Delete” button resets timers, transmitter
status and „Min/Max.” telemetry values on the display.
10. Transmitter battery status (graphically).
9. Transmitter battery status (percent).
7. Bluetooth module activity.
8. The throttle lock icon informs about the throttle lever position
being locked. This is a safety function preventing the engine
from starting unintentionally. If the lock icon is not displayed,
this function is not active.
transmitter's memory. A cross indicates that telemetry has
been manually turned off by the user.
1
2
3
4
F5
5
6
7
8
F4
9
10
16
To Next Page
Loading...