radio control system
EN
Note: while entering the value, we can easily switch the units by
the "menu" button (x1, x10, x100, x1000).
m e n u . T he n co n f ir m t he
"Enabled" option.
4. In the "File" item, select a
suitable voice message from the menu.
5. Confirm with "F5" (OK).
Controller temperature alarm
The model is powered by the BEC of
the controller and the used MEZON
EV O 50 BEC has a maximum
t e m p e r a t u r e o f 1 0 0 ° C
r e c o m m e n d e d b y t h e
manufacturer. Therefore, it is wise
to monitor the temperature of the
Controller for safety reasons. You
can c reate a n ala r m for th e
temperature of the controller in the
3. For example, the model has a
main battery with a capacity of
5000mAh. Under the condition
that we want to leave 20% of
the capacity in the main battery,
enter in the item "Condition"
"X>" (more than) and enter the
value 4000mAh into the next
field .
same way as in the previous point, only until in the "Condition" item,
enter the value 90°C and select a different type of voice message.
This completes the creation and setup of the Cessna 150 sample
model.
Note: for additional Duplex system setup options and models, we
recommend using the transmitter's "help", see chapter 3.12
Help mode.
29
To Next Page
Loading...