48
0X001030 POWER FAIL
Check the Power supply to wall plug
If the problem still persists:
Check the main power supply cord and plug.
If the problem still persists:
Check the main switch.
If the problem still persists:
Check the main power supply with C55.
If the problem still persists:
Check VCC with C110.
If the problem still persists:
Check power supply cable and connectors inside of the machine.
If the problem still persists:
Call Snap On
C Codes C55, C110
0X001031 TEMPERATURE SENSOR
Check the main shaft Optoencoder ! at cable.
If the problem still persists:
Check the main shaft Optoencoder.
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C codes C57, C85, C86, C115, C84, C88
0X001032 VCC ABOVE LIMIT OF 5.2VDC
Check the power supply with C110.
If the problem still persists:
Check the IBP box
C Codes C110, C86, C115, C84, C88
0X001033 VCC BELOW LIMIT OF 5.2VDC
Check VCC connectors and cables
Check the power supply with C110.
If the problem still persists:
Check sonar sensor.
If the problem still persists:
Check the main shaft Optoencoder
If the problem still persists:
Check the IBP box
If the problem still persists:
Call Snap On
C Codes C110, C86, C115, C84, C88
To Next Page
Loading...