Johnson Controls CIW01 User Manual

P5415479
21
(2) Select “Detailed Setting” with “ ” or “ ” and
press “OK”.
• When using a main controller, the “Power
Saving Detailed Setting” screen is
displayed. Refer to (3) below.
• When using a sub controller or if the
indoor unit does not support power saving,
the “Detailed Setting” of the “Intermittent
Control” is displayed. Refer to (4) below.
(3) Select “Intermittent Control” with “
” or “ ”
and press “OK”.
The detailed setting screen of the intermittent
control is displayed.
(4) By pressing “
” or “ ”, the
following indications are displayed :
“LOW→MED→HIGH” ↔ “LOW Only” ↔
“MED Only” ↔ “HIGH Only”.
Press “OK” after selecting a setting.
(5) The setting confi rmation screen is displayed.
Select “Yes” with “
” or “ ” and press “OK”
to confi rm the setting. The screen returns to
normal mode.
If the “Power Saving Setting” setting is
accessible, set it “ON” using “Power Saving
Guidance”.
Back
OK
Detailed Setting
Power Saving Mode Setting
Power Saving Setting
Entr RtrnSel.
Detailed Setting
Intermittent Control
Rotation Control
Capacity Control
Entr Rtrn
Sel.
Back
Detailed Setting of Intermnt Control.
OK
Intermittent Control
Chg level
LOWяMEDяHIGH
Entr RtrnAdj.
Back
OK
Select setting range of
power saving.
Back
OK
Intermittent Control
Yes No
Sel.
Entr Rtrn
Fix power saving settings.
Cancel current power saving
settings?
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help

Johnson Controls CIW01 Specifications

General

Brand	Johnson Controls
Model	CIW01
Category	Control Panel
Language	English