42
P5415479
(2) Press “Back/Help”.
The screen returns to the “Help Menu”.
• To return to normal mode,
press “Back/Help” again.
9.6 Contact Information
The screen displays “Contact Information” and the
latest alarm code.
(1) Select “Contact Information” from the “Help
Menu” and press “OK”. The “Contact
Information” and the latest alarm code is
displayed along with contact information for
service.
OK
Help Menu
Contact Information
Troubleshooting
About Operation
Current Setting
Entr Rtrn
Sel.
About Indication
Back
OK
Menu
Back/Help
OK
Help Menu
Contact Information
Troubleshooting
About Operation
Current Setting
Entr Rtrn
Sel.
About Indication
Back
OK
Menu
Back/Help
OK
Menu
Back/Help
10.
Other Indications
10.1 In Normal Condition
10.1.1 Main / Sub Controller
The icon “MAIN” is displayed as ON when the
controller is set as MAIN.
Use the main controller to set principal power
saving.
When there is a single controller, the icon “MAIN”
is not displayed as ON.
The icon “SUB” is displayed as ON when the
controller is set as Sub.
The sub controller cannot set power saving
except for a part of the power saving function.
The icon “
SUB” is displayed as ON when the
main controller is absent.
In this instance, it is possible that the control
with the power saving and the operation noise
reduction functions may not operate normally.
To Next Page
Loading...
Need help?
General
