Johnson Controls CIW01 User Manual

22
P5415479
8.7 Night Quiet Operation
This function is used to control the operation noise
of the outdoor unit.
NOTES:
• The “Main/Sub-Remote” display in the “Current
Setting” of the “Help Menu” cannot be set if
“Sub” or “−−” is displayed.
“−−”: The unit does not support power saving.
• Depending on the operation noise reduction
setting below, it is possible to change the
function setting to reduce the noise of the
outdoor unit.
If questions arise concerning the amount of
noise, contact your distributor for detailed
information.
• The cooling/heating capacity can be decreased
when using the “Operation Noise Reduction”
setting.
(1) Select “Operation Noise Reduction” from the
menu screen and press “OK”.
The “Operation Noise Reduction” setting
screen is displayed.
Setting Outdoor Unit Setting Name
Not Available No Setting
LOW Setting 1
MED Setting 2
HIGH Setting 3
(2) By pressing “
” or “ ” the setting changes
as follows.
OFF ↔ LOW ↔ MED ↔ HIGH
Select the level and press “OK”.
(3) The setting confi rmation screen is displayed.
Select “Yes” with “
” or “ ” and press “OK”
to confi rm the setting. The screen returns to
normal mode.
Menu
Function 10
Sav/Reduction Schedule
Comfort Setting
Quick Function
02
/
05
Operation Noise Reduction
15:10(Fri)
Entr RtrnSel.
Back
OK
Back
OK
Operation Noise Reduction
Noise Red
OFF
Entr RtrnAdj.
Back
OK
Operation Noise Reduction
Yes No
Sel.
Entr Rtrn
Set operation noise
reduction?
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help
OK
Menu
Back/Help

Johnson Controls CIW01 Specifications

General

Brand	Johnson Controls
Model	CIW01
Category	Control Panel
Language	English