JOHNSON CONTROLS
116
FORM 160.54-O1
USER SCREEN
OVERVIEW
This screen allows denition of custom User ID’s and
matching passwords. This allows the building admin-
istrator to assign custom passwords to those who are
authorized to maintain the chiller.
Each Custom User value is not linked to a specic button.
Instead, the Change button is pressed which enables the
cursor arrows which are used to highlight the Custom
User parameter the user wishes to modify. At this point
the ‘’ (Check) button is pressed and the value may
be entered.
DISPLAY ONLY
None
PROGRAMMABLE
System Language
Access Level Required: OPERATOR
Allows the user to dene the language for all Screens.
The desired language is selected by scrolling through the
list of those available. English is the Default language
and is selected by pressing the ▲ key when the dialog
box appears during the selection process. The selected
language will not be displayed until after the user
navigates from the USER Screen to another Screen. The
selections are: English, French, German, Hungarian,
Italian, Japanese(software version C.OPT.01.20.307
and later), Portuguese, Simplied Chinese, Spanish, and
Traditional Chinese.
English / Metric Units
Access Level Required: OPERATOR
Dene the unit system (English or Metric) used by the
chiller display.
Custom User ID (4)
Access Level Required: SERVICE
This allows the user to specify up to four (4) Custom User
ID values. Each user ID will then require a corresponding
Password and User Level. A User ID can be dened for
various maintenance personnel. Service Technicians refer
to YORK Service Manual 160.54-M1.
00317VIP
FIG. 29
OptiView Control Center
To Next Page
Loading...
