FORM 160.54-O1
131
JOHNSON CONTROLS
CUSTOM SCREEN
OVERVIEW
(Flash memory Card version C.MLM.01.04 or later)
This screen allows up to 10 Service Technician selected
parameters to be displayed. These parameters are se-
lected from a list on the Custom View Setup Screen.
This allows the Service Technician to display parameters
pertinent to a particular problem during troubleshooting.
At completion of the service call, the display can be
cleared or the parameters can be left there for monitor-
ing by operations personnel.
DISPLAY ONLY
None
PROGRAMMABLE
Print
Access Level Required: VIEW
This generates a listing of the parameters displayed on
this screen.
NAVIGATION
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
History
Access Level Required: VIEW
Causes an instant return to the History Screen.
Setup
Access Level Required: OPERATOR
Causes a jump to the sub-screen that allows selection of
the parameters to be displayed.
FIG. 38
00324VIP
2
To Next Page
Loading...
