FORM 160.54-O1
129
JOHNSON CONTROLS
SECURITY LOG SCREEN
OVERVIEW
(This screen only available with Flash Memory Card
version C.MLM.01.06.xxx and later)
This screen displays a listing of the last 75 setpoint
changes. They are listed and numbered in reverse order
in which they were changed, with the most recent listed
as number 1. Multiple pages are necessary to display
all 75 changes. Not all setpoints are logged. Service
technicians refer to list in YORK Service Manual
160.54-M1.
The details of any setpoint change can be viewed by
navigating to a subscreen that displays the date and time
of the change, Access Level and USER ID used to make
the change, the old setpoint value and the new setpoint
value.
Requires a login access level of
SERVICE.
DISPLAY ONLY
Category
Displays the category of the setpoint (motor, evaporator,
condenser, etc.)
Setpoint
Displays the setpoint that was changed.
New Value
Displays the value that was entered at the time of the
setpoint change.
PROGRAMMABLE
Log Entry
Allows the user to select a particular setpoint change
for detail viewing.
Print
Generates a detailed report of all setpoint changes listed
in the setpoint change log.
Page Up
Scroll up in the displayed data (if applicable).
Page Down
Scroll down in the displayed data (if applicable).
NAVIGATION
Home
Access level Required: SERVICE
Causes an instant return to the Home Screen.
History
Access Level Required: SERVICE
Causes an instant return to the History Screen.
View Details
Access Level required: SERVICE
Causes a move to a sub-screen containing the details of
the setpoint change selected with the Log Entry key.
FIG. 36
00662VIP
2
To Next Page
Loading...
