FORM 160.54-O1
47
JOHNSON CONTROLS
Cancel Calibration
This option only becomes available after calibration
has started. Service Technicians refer to YORK Service
Manual 160.54-M1 for an explanation of this setpoint.
Accept Calibration
This option only becomes available after the calibration
sequence is complete. Service Technicians refer to
YORK Service Manual 160.54-M1 for an explanation
of this setpoint.
Fault Acknowledge
This option is only displayed if a fault is present. Al-
lows clearing of High Speed Thrust Bearing related
shutdowns. Service Technicians refer to YORK Service
Manual 160.54-M1 for a more detailed explanation.
NAVIGATION
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
Compressor
Access Level Required: VIEW
Return to the Compressor Screen.
2
To Next Page
Loading...
