Johnson Controls YORK YK MaxE User Manual

JOHNSON CONTROLS
78
FORM 160.54-O1
Full Load Amps
Access Level Required: SERVICE
Denes the maximum amps at which the motor can op-
erate this value is viewable when logged in at VIEW or
OPERATOR level. Service Technicians refer to YORK
Service manual 160.54-M1. With software version
C.OPT.01.20.307 (and later), the maximum program-
mable value of this setpoint is equal to PROGRAMMED
DRIVE CURRENT (Modbus Address 40013) value
received from the MV VSD. In previous software ver-
sions, it was derived from a lookup table based on the
MOTOR RATED VOLTAGE and MV VSD Model.
KWH Reset
Access Level Required: SERVICE
Allows the user to reset the cumulative Kilowatt Hours
to zero. Service Technicians refer to YORK Service
manual 160.54-M1.
OptiView Control Center
NAVIGATION
Home
Access level Required: VIEW
Causes an instant return to the Home Screen.
ACC Details
Access Level required: SERVICE
Moves to a subscreen which provides more information
about the Adaptive Capacity Control.
Motor Lube
Moves to a subscreen allowing operator acknowledge-
ment of the compressor motor lubrication and viewing
of the compressor motor lubrication parameters.

Johnson Controls YORK YK MaxE Specifications

General

Brand	Johnson Controls
Model	YORK YK MaxE
Category	Chiller
Language	English