joule Modul-AIR All-E - Setting the Heat Pump airflow rate

77Modul-AIR Exhaust Air Heat Pump Installation Guide
Setting the Heat Pump airflow rate
Aer setting up the Modul-AIR and any external parts connected to it the heat pump air flow rate must be
entered.
The procedure to input the HP rate is as follows:
To access the heat pump flow rate function of the Modul-AIR
unit, navigate to the spanner icon on the home screen.
Enter the login code to access the installer functions. The
installer code is issued during the Modul-AIR Joule installer
training program.
Press the right arrow and press Yes to save the setting.
Navigate to the Modul-AIR settings menu and press the icon.