85Modul-AIR Exhaust Air Heat Pump Installation Guide
Tap the settings icon.
The confirmation screen will appear. Press Yes to save the
settings.
Select the desired Priority for the Modul-AIR unit.
(Tank = DHW Priority or CH = Space Heating Priority)
If the tank has an element, enable to 2kW option. Otherwise,
select N/A.
Select the volume of the tank installed.
Press the right arrow.
Select the desired setpoint temperature for the Tank.
The default setting is ‘Eco 55°C’ and this is Joules
recommended setting.
N.B: The lower setting used, the more economical the Modul-
AIR will be BUT the higher the chance of running out of hot
water.
To Next Page
Loading...
