87Modul-AIR Exhaust Air Heat Pump Installation Guide
Tap the settings icon.
Once the Green Comfort is enabled, the Green Comfort
Settings option will then be available in the menu.
Set the deviation from the outgoing air temperature of the
Green Comfort module in relation to the desired room
temperature (room thermostat).
Press the arrow in the top le to exit the screen leave.
The confirmation screen will appear. Press Yes to save the
settings.
Set the incoming airflow deviation from the Green Comfort
module compared to the Modul-AIR.
The default setting is -5%.
Use the minus and plus buttons for this.
Press the right arrow.
To Next Page
Loading...
