Section 3 Basic Operations 3-36
Inputting a single-digit value
Enter a value and click on another input part or move the active part by using the right arrow key.
Example:
Inputting blank space in the decimal fraction section [3 digits)
After a value is input and the [Enter] key is clicked on, the input of the decimal fraction section is
determined.
Example:
Enter 1.
The value that is input by clicking on another input part or
the right arrow key becomes a single-digit value and the
value is determined. 0 is input in the blank space.
Enter "5" and click on the [Enter] key.
"0" is input in the blank space next to "5" and the value is determined.
To Next Page
Loading...
