JRC JAN-7202 - Confirming the Alert Sound [Sound Test]

9-23 Section 9 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
19
21
23
24
24
26
27
4 Operate the keys, buttons and dials in the operation unit.
If the performance of the operation unit is normal, the colors of the keys, buttons and dials are
changed.
5 Click on the [Key Test Stop] button after the operation check.
Returns to the [Selftest] dialog box.
9.4.4 Confirming the alert sound [Sound Test]
Confirm the alert sound.
1 Click on the [Menu] button at the bottom left corner of the screen.
The menu is displayed.
2 Click on the [Maintenance] - [Selftest] - [Sound Test] button on the menu.
3 Click on the [Sound Test Start] button.
A sound test starts. All the available beep sound volumes can be tested by increasing the level
from 0.