JRC JAN-7202 - General System Diagrams

Section 1 Overview 1-20
1.5 General System Diagrams
Connection examples of this equipment are shown below.
150/250V TTYCSLA-4
AIS
(IEC61162-2)
GYRO COMPASS
(IEC61162-2)
No.1 DGPS
(IEC61162-1)
SDME
(IEC61162-1)
BNWAS
(Dry Contact)
CAT-5 LAN Cable
NQE-1143
Junction Box
(Option)
NCE-5605
Trackball Operation Unit
NBD-913
Power Supply Unit
NOTE: ELIMINATING THE INTERFERENCE ON FREQUENCIES USED FOR MARINE COMMUNICATIONS AND
NAVIGATION DUE TO OPERATION OF THE RADAR,
ALL CABLES OF THE RADAR ARE TO BE RUN AWAY FROM THE CABLES OF RADIO EQUIPMENT.
(ex. RADIOTELEPHONE, COMMUNICATIONS RECEIVER and DIRECTION FINDER. etc..)
ESPECIALLY INTER-WIRING CABLES BETWEEN SCANNER UNIT AND DISPLAY UNIT OF THE RADAR
SHOULD NOT BE RUN PARALLEL WITH THE CABLES OF RADIO EQUIPMENT.
150/250V TTYCSLA-1
150/250V TTYCSLA-1
150/250V TTYCSLA-1
150/250V TTYCSLA-1
NWZ-208
26inch Monitor Unit
(Option)
NCE-5625
Keyboard Operation Unit
(Option)
W64:7ZCNA4187(0.40m)
CWA-246 26inch Display Unit Mount Kit
NQA-2443
Sensor LAN
Switch Unit
(Option)
150/250V TTYCSLA-4
AIS
(IEC61162-2)
GYRO COMPASS
(IEC61162-2)
No.1 DGPS
(IEC61162-1)
SDME
(IEC61162-1)
BNWAS
(Dry Contact)
150/250V TTYCSLA-1
150/250V TTYCSLA-1
150/250V TTYCSLA-1
150/250V TTYCSLA-1
CAT-5 LAN Cable
NDC-1590
Central Control Unit
Inner wiring
24VDC/Max2A
(For Junction Box:SLC)
Inner wiring
24VDC/Max0.4A
(For LAN Unit)
CQD-2312
Relay
Terminal
0.6/1kV DPYCYS-16
0.6/1kV DPYCY-6
Transitional Source of
Emergency Electric Power
24VDC/Max300W
(For System Backup)
Ship's Main
AC220V 1PH/Max240VA
Inner wiring
24VDC
Inner wiring
AC220V 1PH
General System Diagram of JAN-9202