EasyManua.ls Logo

JRC JAN-7202 - Information about Side Thruster of CCP (Controllable Pitch Propeller) Type

JRC JAN-7202
332 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-13 Chapter 4 Conning Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Item Display contents
Azimuth thruster angle (response
value)
Displays the azimuth thruster angle (response value) with a meter
display and a numerical display.
Azimuth thruster angle
(indication value)
Displays the azimuth thruster angle (indication value).
On the meter display, the angle is displayed as a yellow line.
Azimuth thruster pitch angle
(response value)
Displays the azimuth thruster pitch angle (response value) with a
meter display and a numerical display.
The unit can be changed on the View menu.
For the details, refer to "5.1.2 Setting up the display of unit of
setting value".
Azimuth thruster pitch angle
(order value)
Displays the azimuth thruster pitch angle (order value).
On the meter display, the pitch angle is displayed as a yellow line.
Azimuth thruster revolution
(response value)
Displays the azimuth thruster revolution (response value) with a
meter display and a numerical display.
The unit can be changed on the View menu.
For the details, refer to "5.1.2 Setting up the display of unit of
setting value".
Azimuth thruster revolution
(order value)
Displays the azimuth thruster revolution (order value).
On the meter display, the revolution is displayed as a yellow line.
4.2.3.3 Information about side thruster of CCP (controllable pitch
propeller) type
Item Display contents
Thruster pitch angle
(response value)
Displays the pitch angle (response value) of the side thruster.
On the meter display, the angle is displayed as a red (Port direction) or
green (Starboard direction) bar. The maximum value is displayed at
both ends of the meter.
In numerical display, a value with the port (red)/starboard (green) mark
is displayed.
The unit can be changed on the View menu.
For the details, refer to "5.1.2 Setting up the display of unit of setting
value".
Thruster pitch angle
(order value)
Displays the pitch angle of side thruster (order value).
On the meter display, the angle is displayed as a yellow line.
Thruster pitch angle (indicated value)
Thruster pitch angle (response value)
Thruster pitch
angle (response
value)

Table of Contents

Other manuals for JRC JAN-7202

Related product manuals