JRC JAN-7202 - Checking the Enable;Disable Statuses of the Functions that Have Been Installed

9-5 Section 9 Maintenance & Inspection
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
19
21
23
24
24
26
27
9.1.3.2 Checking the enable/disable statuses of the functions that
have been installed
When you want to use a USB flash memory to read or write a file, make sure in
advance that the USB flash
memory is not affected by a computer virus. If the
display unit is infected with a virus, other equipment may also be infected, with the
result that a trouble may occur.
Before removing the USB flash memory, check for the access lamp of the USB flash
memory and make sure that it is not being accessed.
If you remove or insert the USB flash memory when it is accessed, data may be
destroyed and a trouble may occur.
1 Click on the [Menu] button at the bottom left corner of the screen.
The menu is displayed.
2 Click on the [Maintenance] - [System Information] button on the menu.
The [System Information] dialog box appears.
3 Click on the [Functionality] tab.
The functionality information is displayed.
The display contents vary depending on the number of operation modes and whether the
modes include the primary task (shown by the name of this equipment).