Section 6 Setting Up Alerts 6-4
6.3 Position Integrity Alert Generation
Conditions
When [Position Integrity] is selected in the Classification pane, the [Position] dialog is displayed in the
Edit pain.
In this dialog, the generation condition of the position monitor warning and the HDOP limit can be set
up.
6.3.1 Setting up the generation condition of the
position monitor warning
Enter the following threshold values for generating the position monitor warning.
Position Difference Limit:
The difference in distances when two GPS positions are compared at every second is used as a
threshold value. Specify the difference in a range between 0.010 and 9.990 NM.
Note
• Position Difference Limit takes effect when two GPSs are installed.
To Next Page
Loading...
