Chapter 4 Conning Display 4-40
Item Display contents
Speed Over the Ground Displays the speed over the ground.
The reliabilities of the values are color coded into three colors:
Normal character color: Normal sensor value
Yellow: Deterioration of sensor value reliability
Orange: Abnormal sensor value
The unit can be changed on the View menu.
For the details, refer to "5.1.2 Setting up the display of unit of
setting value".
Course Over the
Ground/Speed Over the
Ground sensor name combo
box
Displays and changes the course over the ground/ speed over the
ground sensor name.
The following sensor sources can be selected.
When [Menu] is selected, the [Sensor Selection/Status] dialog is
displayed.
Log
*1
, Log1
*1 *2
, Log2
*1 *2
, and GPSx
*3
For the details of the sensor source setting, refer to "9.1.5 Setting
and confirming the sensor source".
*1: When 1AX is installed for Log, Log cannot be selected from the sensor source.
*2: Only for the case where two Log units are available.
*3: When two or more GPS units are present, "x" indicates the unit number.
4.2.3.39 Rudder angle/ship's heading graph
Item Display contents
Ship's heading +
Rudder angle
graph display
Displays the graph of the ship's heading and rudder angle.
The graph range can be changed on the View menu.
For the details, refer to "5.1.5 Setting a rudder angle/ship's heading graph".
To Next Page
Loading...
