Chapter 4 Conning Display 4-4
4.2 How to view each block
This section describes the information that is indicated in each block displayed on the Conning Display
screen. The information is described on a per-block basis.
All the blocks that can be displayed by Conning Display are summarized in “4.2.1 Block list”.
Search the block whose meaning of the displayed information you want to know from the list and refer
to the corresponding description in “4.2.3 Description of each block”.
For the procedure for selecting a block to be displayed on the screen in Custom mode, refer to “4.2.2
Selecting a block to be displayed on the screen in Custom mode”.
4.2.1 Block list
Block name Example of the shape of the block
Reference
section
3D Navigation information and the legend of the
navigation
4.2.3.1
Information about azimuth thruster of CPP
(controllable pitch propeller) type
4.2.3.2
Information about side thruster of CCP (controllable
pitch propeller) type
4.2.3.3
Information about propeller engine of CPP
(controllable pitch propeller) type
4.2.3.4
Information about azimuth thruster of FPP (fixed
pitch propeller) type
4.2.3.5
Information about side thruster of FPP (fixed pitch
propeller) type
4.2.3.6
Information about propeller engine of FPP (fixed
pitch propeller) type
4.2.3.7
N-UP/H-UP switching button
4.2.3.8
To Next Page
Loading...
