Section 3 Basic Operations 3-2
3.2 Starting Each Mode
When this equipment starts up, a task menu is displayed on the screen.
On the Task menu, you can select and start the desired mode from the operation modes available for
this equipment.
When the button of the mode to be executed is clicked on, the screen of the mode is displayed.
Note
When this equipment is started for the first time, if no operation is performed within 10 seconds
after the task menu is displayed, the mode screen that has been set up at the time of shipment will
appear.
3.2.1 Starting Conning Display
To display the top screen of Conning Display, click on the [Navigation Data Monitoring (Conning
Display)] button in the task menu.
Task Menu Display Example
To Next Page
Loading...
