Section 5 Setting Up Screen View 5-8
5.1.5 Setting a rudder angle/ship’s heading graph
When [Gyro/Rudder Graph] is selected on the classification pain, the [Gyro/Rudder Graph] dialog is
displayed on the edit pain.
Note
This dialog may not be displayed depending on the equipment setting.
The following table shows the setting details:
Setting Item Description of Setting Setting Value
Time Range Select a time range for the rudder angle/ship’s
heading graph from the combo box.
5 min, 10 min, 15 min, 30 min
Rudder Range Select a rudder angle for the rudder
angle/ship’s heading graph from the combo
box.
30°, 40°, 50°, 60°, 70°, 80°
To Next Page
Loading...
