JRC JAN-7202 - Section 3 Basic Operations; 3.1 Powering On and Starting

3-1 Section 3 Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
Section 3 Basic Operations
3.1 Powering On and Starting
Turn on the power supply according to the following procedure.
For low-temperature start-up, perform pre-heat for more than 30 minutes.
Otherwise, an operation failure may occur and an accident may occur.
1 Press the Power button on the operation unit.
The Power button is lit and the start-up screen is displayed.
Memo
When power is applied with all the power supplies to the display unit shut off, the display
unit starts automatically even when the Power button is not pressed.
After the start-up screen is displayed, the task menu is displayed after a brief interval.