1-1 Section 1 Overview
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Section 1 Overview
Do not put any container with water or small metallic object on this equipment.
Water may spill or metal may enter the equipment, causing fire, electric shock or
other troubles.
Should water or metal have entered the equipment, turn off the circuit breaker and
contact our sales division, branch office, service center or representative located
nearest to you.
If you continue to use the equipment without taking required action, fire, electric
shock or other troubles may occur.
Should you find out smoke, offensive smell or extreme heat on the equipment, turn off
the switch and circuit breaker immediately. Then contact our sales division, branch
office, service center or representative located nearest to you.
If you continue to use the equipment without taking required action, fire or electric
shock may occur.
Do not use or leave the equipment where there is a direct sunshine and high humidity
or the temperature exceeds 55C.
Otherwise, fire or other troubles may occur.
Do not block the ventilation port of the equipment.
Otherwise, fire or other troubles may be caused by heat accumulation.
Do not touch the equipment when your hands or gloves are wet with fresh water or
seawater.
Otherwise, electric shock or other troubles may occur.
• Do not place any object on the operation panel.
In particular, if a hot object is placed on the operation panel, it can cause
deformation of the surface of the operation panel.
• Do not apply any undue shock on the operation panel, trackball and dials.
Otherwise, a malfunction may result.
• If a fan alarm or CPU temperature rise alarm has occurred, immediately turn off
the power.
Keeping the equipment in operation under such condition may cause a fire or a
malfunction.
After turning off the power, contact our head office, or a nearby branch or local
office to request servicing.
To Next Page
Loading...
