JRC JAN-7202 - 3.3 Basic Operations when using a Trackball

3-3 Section 3 Basic Operations
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
APP A
APP B
1
3.3 Basic Operations when using a
Trackball
A trackball in the trackball operation unit is mainly used for the operations of this equipment.
This section describes the basic operations performed using the trackball.
3.3.1 Trackball functions
Trackball:
Use the trackball to move the cursor on the screen. Use the trackball for specifying a position, and
setting a button and a dialog box.
Left button:
Use the left button to determine the position, and determine the button and dialog box settings.
In this manual, "click" refers to the clicking of the left button once and "double-click" refers to the
clicking of the left button twice consecutively.
Right button:
Do not use the right button while operating Conning Display.
3.3.2 Basic trackball operations
Move the cursor that is displayed on the screen by the trackball and perform various operations using
the left mouse button.
3.3.2.1 Cursor types
Only the "Pointer Cursor" type ( ) is available.
Right button
Left button
Trackball