Section 3 Basic Operations 3-26
3.8.3 [Display Brightness] dialog box
When [MULTI] dial is operated while [Display Brightness] is selected as the function that is assigned to
the [MULTI] dial, the [Display Brightness] dialog is displayed.
It is possible to adjust the brightness of the display section by rotating the [MULTI] dial.
In order to set an offset value so that when set to the same value as the screen brightness of other
equipment, the light emitted becomes the same as in other equipment, click the [Advanced] button and
adjust the offset using the buttons displayed for setting the "Offset".
To Next Page
Loading...
