Section 5 Setting Up Screen View 5-6
Setting Item Description of Setting Setting Value
Time Range Select a time range for the water depth graph
from the combo box.
10 min, 15 min, 30 min,
60 min, 12 hours
Reference
(Priorities)
Switch the reference of the water depth value.
AUTO: Switch the reference of the water depth
value according to the received value.
Keel: Set the reference of the water depth to
keel.
Trans d u c er: Set the reference of the water
depth to transducer. It can be selected
only when FURUNO is selected in
[Device Installation] - [Echo Sounder 1].
Surface: Set the reference of the water depth to
surface. It can be selected only when
FURUNO is selected in [Device
Installation] - [Echo Sounder 1].
AUTO, Keel,
Transducer(When
FURUNO is selected),
Surface(When
FURUNO is selected)
To Next Page
Loading...
