136
OPTION
● Loading Printer Paper
Cut the paper so that its leading
edge is straight (at right angles to
the edges).
Cut carefully. If the paper is creased or uneven, it
may jam.
Turn the power OFF, and open the
paper cover by pressing the knob.
Remove the center shaft from its
holder and insert it through the
center of the paper roll as shown.
Turn the power ON, insert the end
of the paper through the paper
slot, then press
FEED
to feed the
paper through the printer.
POWER
Switch
Knob
Paper Cover
Center Shaft
Holder
Paper Slot
Switch
FEED
9.3 NKG-52 Printer
To Next Page
Loading...